Cifs_mount failed w/return code = 22

CIFS VFS: cifs_mount failed w/return code = -22

1. CIFS VFS: cifs_mount failed w/return code = -22 This error is generally pointing to the fact that the CIFS routines cannot resolve the name, or connect to the server indicated. More often than not its because the machine is references by name which is failing to resolve. Try by using the CIFS/Windows Server IP address
2. CIFS mount fails with failed w/return code = -22 [root@example-kudryavka ~]# mount -t cifs -o rw,username=testuser //kudo-server/logs /mnt/kudologs mount: wrong fs type, bad option, bad superblock on //kudo-server/logs, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so [root@example-kudryavka ~]# dmesg | tail fs/cifs/cifsfs.c: Devname: //kudo-server/logs flags: 0 fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 10 with uid: 0 fs/cifs.
3. CIFS VFS: cifs_mount failed w/return code = -22. Irgendwelche Ideen was ich sonst noch versuchen könnte, oder was dies sein könnte? Ist das cifs-Modul geladen? modprobe cifs; ja, aber ich schaffte es zum beheben des Problems ein wenig anders als Sie, in sehen können das update von meinem post oben . Informationsquelle Autor user3242272 | 2014-01-28. cifs linux mount share superblock. 2.
4. I had the same issue on Arch Linux, with this message in log: kernel: CIFS VFS: cifs_mount failed w/return code = -22. For me the solution was to specify older version of cifs (by default it was 3.0): /etc/fstab: //my-router/share /media/share cifs ver=2.1,rw,soft,uid=ele,gid=ele,file_mode=0770,dir_mode=0770,credentials=/etc/router-credentials
5. What does cifs_mount failed w/return code = -22 indicate. 2 CIFS VFS: cifs_mount failed w/return code = -22 and wrong fs type, bad option, bad superblock 1. Locked out of cifs mounted storage. 3. Crontab executes shell script: Mount error(13): Permission denied. 0. Perl script not found when on a shared mounted hard drive located on a. CIFS VFS: cifs_mount failed w/return code = -22 und wrong fs type, bad option, bad superblock Habe ich mit einem linux-server seit geraumer Zeit mit.
6. kernel: [1830446.002198] CIFS VFS: cifs_mount failed w/return code = -22. That's it - not a lot of detail to go on... I'm using the EXACT same syntax and credentials for both mounts. I KNOW the credentials are valid and working because I use them to connect to the same share on my Windows box. I'd change the share name, but unfortunately it's.

Cifs mount fails with failed w/return code = -22 - Red

• Welcome to LinuxQuestions.org, a friendly and active Linux Community. You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features
• TrevorH wrote:You could look at the Windows Update history and see what fixes were applied around the time it stopped working.Perhaps you can recreate a similar problem on a non-production box and experiment with backing those fixes out one by one until you see which one it was that caused the problem to start
• The IPC$ share is always accessed in a per-user context because it's really (in the MSFT world) a remote-procedure-call (RPC) interface. That is, the IPC$ share gives a user a channel to authenticate to the Server service such that they can then make RPC calls to it

The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [ 238.775042] CIFS VFS: Connecting to DFS root not implemented yet [ 238.775166] CIFS VFS: cifs_mount failed w/return code = -22 [ 303.960791] CIFS VFS: Connecting to DFS root not implemented yet [ 303.960918] CIFS VFS: cifs_mount failed w/return code = -22 [ 322.494906] CIFS VFS: Connecting to DFS root not implemented yet [ 322.495054] CIFS VFS: cifs_mount failed w/return code = -22 [ 423.

如果提示cifs_mount failed w/return code = -22，代表需要安装 smbclient，在cd1里� I don't know if this specify related to your case, but in my case I tried to secure my SAMBA share from WannaCry so I set the option min protocol to SMB2 [global] min protocol = SMB2 But after that I was not able to access my shares from Kodi and simple mount.cifs command didn't help.. So I'm including this in case some else will come across this question via search like I did Jun 27 12:22:42 samba-client kernel: CIFS VFS: cifs_mount failed w/return code = -22 Jun 27 12:22:42 samba-client kernel: CIFS VFS: cifs_mount failed w/return code = -22 Jun 27 12:22:55 samba-client kernel: Status code returned 0xc000000d NT_STATUS_INVALID_PARAMETER Jun 27 12:22:55 samba-client kernel: Status code returned 0xc000000d NT_STATUS_INVALID_PARAMETER Jun 27 12:22:55 samba-client kernel: CIFS VFS: Send error in SessSetup = -22 Jun 27 12:22:55 samba-client kernel: CIFS VFS: Send. CIFS VFS: cifs_mount failed w/return code = -22 CIFS VFS: No username specified. Wenn ich Benutzername und Passwort direkt in der fstab angebe klappt es (ist mir jedoch zu riskant). Weiss jemand, was ich machen muss, damit das Mounten mit den credentials funktioniert? Vielen Dank im Voraus. Simo

This tool is part of the cifs-utils suite. mount.cifs mounts a Linux CIFS filesystem. It is usually invoked indirectly by the mount(8) command when using the -t cifs option. This command only works in Linux, and the kernel must support the cifs filesystem Join Date Jun 2011 Location Bratislava, SVK Beans 25 Distro Ubuntu 11.04 Natty Narwha What does cifs_mount failed w/return code = -22 indicate. 7. What does cifs_mount failed w/return code = -111 indicate? 0. mount synology NAS. 1. CephFS: mount fails with can't read superblock 0. Kubernaties unable to mount NFS FS on Google Container Engine. 0. Java File.setLastModified() fails on Linux when you are not the file owner. Hot. CIFS VFS: cifs_mount failed w/return code = -22 私は別のセントロシステムに同じシェアを乗せることができます。 サーバーにpingを実行すると、マウントポイントディレクトリが作成されました。 OS X 10.8（Mountain Lion）で動作するVMware VMとしてUbuntu Server 12.10 x64がインストールされています。 Macでは. Oct 12 16:20:06 localhost kernel: CIFS VFS: cifs_mount failed w/return code = -6 Oct 12 16:20:17 localhost.

Bug 442552 - >sys-kernel/gentoo-sources-3.3.8 - CIFS VFS: cifs_mount failed w/return code = -22 Hello, I'm trying to mount a share folder on an EMC Data Domain to an Ubuntu 8.04 Server. The environment is as follows: Ubuntu Server: Located on DMZ -say- IP 8.8.8. Jul 4 11:19:07 mercury kernel: [41870.280439] CIFS VFS: Send error in SessSetup = -1. Jul 4 11:19:07 mercury kernel: [41870.280626] CIFS VFS: cifs_mount failed w/return code = -1. other services are unaffected and everything was working perfectly until after the server reboot or loading of the new cifs kernel module Hallo. Nutze nun schon seit längerem Linux Mint, ein paar andere Distributionen auch schon ausprobiert, gerne auch raspbian, aber das ist jetzt nebensache CIFS VFS: cifs_mount failed w/return code = -22 私は別のセントロシステムに同じシェアを乗せることができます。 サーバーにpingを実行すると、マウントポイントディレクトリが作成されました。 OS X 10.8（Mountain Lion）で動作するVMware VMとしてUbuntu Server 12.10 x64がインストールされています。 Macでは

cifs - CIFS VFS: cifs_mount failed w/return code = -22

1 CIFS VFS: cifs_mount failed w/return code = -22. Well it turns out that I needed to have the smbfs package installed. This quickly solved my problem. view source print? 1 sudo apt-get install smbfs. Reply Link. prakash Feb 5, 2011 @ 21:11. Thanks , it was useful I was able to mount my windows Filesystem onto linux. Reply Link. Parvathy Feb 9, 2011 @ 11:46. Amazing ! Superb and simple command. Bug 1380383 - CIFS VFS: cifs_mount failed w/return code = -2 with kernel-4.7.4-200.fc24.x86_64 [NEEDINFO Hi zsjoska, You seems to be on the good way, just miss some information... FYI : Linux 4.13 has been released on Sun, 3 Sep 2017. 1.6. CIFS defaults to SMB3. As of Ubuntu 14.04.1 LTS, trying to install smbfs yeilds Package smbfs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source

5411-5272-1091. 49-911-740-53-779. 1 800 144 250. 31-172-505526. 55 11 2165-8000. 1-800-796-3700. 5411-5272-1091. 400-120-3490. 42 (0) 284-084-107. 45-45-16-00-2 Not sure if this is the right place, but here goes; I have a Netgear ReadyNAS nv+. The main shared folder as either cifs or nfs is //readynas01/media The address of the NAS is 192.168.1.16 When I Browse Networks from nautilus on a Ubuntu based (12.04) PC, I can connect to the readynas just fine on smb://readynas01.local/media/ o CIFS VFS: cifs_mount failed w/return code = -22. Well it turns out that I needed to have the smbfs package installed. This quickly solved my problem. sudo apt-get install smbfs. Posted in Solutions. Tagged with Linux, solution. By obdit December 5, 2009. No comments. 0 Responses. Stay in touch with the conversation, subscribe to the RSS feed for comments on this post. You must be logged in to. mount: wrong fs type, bad option, bad superblock on //server/share, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so. Das Syslog hat. CIFS VFS: cifs_mount failed w/return code = -22 CIFS VFS: cifs_mount failed w/return code = -22 I am able to mount the same share on another centos system. I can ping the server, mount point directory has been created. I ran into this problem when using a host name and solved it by using an IP address. E.g.: use . mount -t cifs //192.168.1.15/share rather than. mount -t cifs //servername/share Another possible solution is to install . cifs.

Video: Mounting cifs drive gives: mount error(22): Invalid

Cifs_mount failed w/return code = 111 - what does cifs

Aborting operation fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 2) rc = -22 CIFS VFS: cifs_mount failed w/return code = -22 Took a wireshark trace during this but do not see any traffic over ipv6 source and destination (interface) addresses To all with the following error: CIFS VFS: cifs_mount failed w/return code = -22. You must install samba-client or the kernel will not know the fs type. Under CentOS/Redhat variants: yum install samba-client. Note: samba (the server) is not the same as samba-client

debian - Unable to mount cifs share in fstab with spaces

May 8 16:09:06 evandro-pc kernel: [265246.012935] CIFS VFS: cifs_mount failed w/return code = -22 On this case, if you search on Google you will see the error was that I ran the command without specifying the vers=1.0 argument Every time I tried to call the MOUNT command, I was getting some error like cifs_mount failed w/ return code = -22 that I could see by running dmesg | tail So, some posts lead me to install these things Oct 15 12:23:42 mir kernel: CIFS VFS: Send error in SessSetup = -22. Oct 15 12:23:42 mir kernel: CIFS VFS: cifs_mount failed w/return code = -22. the mount is described in fstab as follows: //krux.lan/storage /mnt/storage@krux cifs user,noauto,nofail,x-systemd.automount,x-systemd.requires=network-online.target,x-systemd.device-timeout=10,x-systemd

[SOLVED] unable to mount cifs file syste

• g from the kernel, something with the way it is compiled?? Is ntlmv2 not implemented correctly or completely
• CIFS VFS: Unexpected SMB signature Status code returned 0xc000000d NT_STATUS_INVALID_PARAMETER CIFS VFS: Send error in SessSetup = -22 CIFS VFS: cifs_mount failed w/return code = -22 . Note: Depending on the Security Mode used, you might need to use different sec options, which includes: none - attempt to connection as a null user (no name
• CIFS VFS: cifs_mount failed w/return code = -22 Last week I upgraded a Gutsy 7.10 server to Hardy 8.04. Today I got a report that a mounted drive was missing. Turns out that the ip=hostname part of an /etc/fstab line works in smbfs, that is, if you've defined the hostname in /etc/hosts, but under cifs, it doesn't work. In addition, it seems that smbfs uses a fallback when a user authentication.
• The following messages are logged to dmesg: CIFS VFS: Connecting to DFS root not implemented yet CIFS VFS: cifs_mount failed w/return code = -22 Reproducible: Always Steps to Reproduce: 1.Boot with a kernel >3.38 2.Attempt to mount a CIFS file share using a command similar to: mount -t cifs //192.168..1/alex /mnt/server -o user=alex,password=(*edited*) Actual Results: mount: wrong fs type, bad option, bad superblock on //192.168..1/alex, missing codepage or helper program, or other error.
• Kernel.org Bugzilla - Bug 197311 CIFS: mount.cifs stopped working with the Windows 10 Pro 15063 SMB server Last modified: 2017-12-28 00:42:44 UT
• CIFS VFS: cifs_mount failed w/return code = -22 CIFS VFS: No username specified. Wenn ich Benutzername und Passwort direkt in der fstab angebe klappt es (ist mir jedoch zu riskant). Weiss jemand, was ich machen muss, damit das Mounten mit den credentials funktioniert? Vielen Dank im Voraus. Simon. Chrissss. Anmeldungsdatum: 31. August 2005. Beiträge: 37971. Zitieren. 11. Oktober 2006 00:45
• Stack Exchange network consists of 176 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.. Visit Stack Exchang

Hey. so I can't figure out why my settings aren't working anymore as they were working before without problems just fine. It's been going on now a while that when ever I boot my machine my network shares are mounted automatically and sometimes they aren't so I have to do mount -a to get them working CIFS VFS: cifs_mount failed w/return code = -22 Ich kann dieselbe Aktie auf einem anderen Centos-System installieren. Ich kann den Server anpingen, das Mount-Point-Verzeichnis wurde erstellt. Bei der Verwendung eines Hostnamens bin ich auf dieses Problem gestoßen und habe es mithilfe einer IP-Adresse gelöst. Z.B: benutzen . mount -t cifs //192.168.1.15/share eher, als . mount -t cifs. [1208223.167024] CIFS VFS: Connecting to DFS root not implemented yet [1208223.178430] CIFS VFS: cifs_mount failed w/return code = -22 [1208571.347110] CIFS VFS: Connecting to DFS root not implemented yet [1208571.358562] CIFS VFS: cifs_mount failed w/return code = -22 networking mount. share | improve this question | follow | edited Dec 25 '16 at 15:08. techraf. 4,064 10 10 gold badges 27 27.

[Solved] Can no longer mount cifs - mount error(112

dmesg behauptet No username specified; cifs_mount failed w/return code = -22. Username und Passwort sind in der commons eingetragen, die stimmen definitiv. Sieht so aus: username=***** password=***** Dass es an einem Helper liegt denke ich nicht, schließlich funktioniert das manuelle mounten ja auch. [Wed Dec 31 19:04:28 1969] CIFS VFS: cifs_mount failed w/return code = -22 [Wed Dec 31 19:04:28 1969] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount

CIFS VFS: cifs_mount failed w/return code = -22 Now I have added Code: [*] DFS feature support: to the kernel but that dose not make any differences. I can mount the share just fine on my primary gentoo rig running ~amd64 with gentoo-sources 3.6.6 on the i7 rig in my signature also I have not had this problem on my HTPC as fare as I can remember also running amd64 but with XBMC so haven't. [ +0.008651] CIFS VFS: cifs_mount failed w/return code = -22 Yeah, I know about credentials and using a name instead of the IP address, but I'm trying to eliminate anything and everything that. [2492180.882826] CIFS VFS: No username specified [2492180.882857] CIFS VFS: cifs_mount failed w/return code = -22. Doing a mount passing the username and password directly would work just fine. Turns out I was missing the following package: sudo apt-get install smbf

Linux samba server: cifs_mount failed w/return code = -1

• [ 318.586740] CIFS VFS: cifs_mount failed w/return code = -22 [ 363.406560] systemd-fstab-generator[2105]: Ignoring automount option for root device [ 815.700246] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers.
• LOL, that was stupid. `apt-cache policy cifs*` showed I didn't have cifs-utils installed, checked my other netbook and it was. So `apt-get install cifs-utils smbclient` fixed it
• Join the Community. Thousands of customers use the McAfee Community for peer-to-peer and expert product support. Enjoy these benefits with a free membership
• Univention Bugzilla - Bug 31328. cifs mount fails from /etc/fstab. Last modified: 2013-05-13 15:19:43 CES
• Ubuntu: Proper fstab entry to mount a samba share on boot? Question: I am a little confused on the proper fstab entry for a samba share in Ubuntu 12.04 * I can get the drive to mount manually by.

Hello, Vielleicht ja mit smb://192.168.178.71/share So machts jedenfalls der Dolphin, Krusader und, ach, der Thunar Leider nein, fragt sich nur warum das nicht klappt. Dann fehlen dem Host wohl die notwendigen Clients (Treiber, smb-Client, cifs) oder die Uhrzeit stimmt nicht Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time Aborting operation CIFS VFS: cifs_mount failed w/return code = -22 eventhough I can ping the ipv6 interface on the server ping6 -I eth0 fe80::214:5eff:fefb:3f7c PING fe80::214:5eff:fefb:3f7c(fe80::214:5eff:fefb:3f7c) from fe80::214:5eff:fefb:3f54 eth0: 56 data bytes 64 bytes from fe80::214:5eff:fefb:3f7c: icmp_seq=1 ttl=64 time=3.92 ms 64 bytes from fe80::214:5eff:fefb:3f7c: icmp_seq=2 ttl=64. OK, answering my own question. Looks like cifs.mount is not part of the Amazon Linux repo. By adding an external samba repo and installing samba3-cifsmount, I can now mount the Windows CIFS share

832741 - Always get CIFS error mount error(22): Invalid

kernel: CIFS VFS: cifs_mount failed w/return code = -22. This isn't particularly helpful, made more infuriating by the fact that I know the command syntax is correct and should be working perfectly fine. Seeing as a number of things broke after switching on IPv6 across the entire network, I've become even more of a cynical bastard and ran some tests using specifically stated IPv6 and IPv4. Mounting by hand works if user name and password are given explicitly, but when using a credentials file (as with autofs) it does not. Yes, the issue looks pretty much like the bug noted upstream ; Lag-na, thanks for you guidance, but unfortunately I failed to get it to work. Because my share is an HDD (Drobo) attached to the iMac. I couldn't locate the share name the way you suggested, but I went to the sharing pane in system preferences and found that the name of the iMac is 27-inch-iMac and it can be accessed at 27-inch-iMac.local. I followed your instructions, entering the Remote.

cifs_mount failed w/return code = -22_chinacodec的专栏-CSDN博�

Hallo, ich möchte einen virtualisierten Webserver auf einem MacBook nutzen. Mit VB ist das ja auch kein Problem, es läuft alles soweit. Nun möchte ich aber einen im Mac-System freigegebenen Ordner in dem Linux-Server mounten Posted: Wed Aug 18, 2010 5:19 pm Post subject: [Solved] mount.cifs issues on Vista,Win7, & Server 200